41 700r4 valve body diagram
TransGo - GM TH-700R4, 4L60 Universal Separator Plate 700-P. 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission will often have the incorrect separator plate that matches the line bias circuit in the valve body. This mismatch can cause no line pressure boost and no forced throttle downshifts at wide open throttle. SOLVED: I need a valve body diagram 700r4 transmission - Fixya A 700R4 usually has 3 switches on the back of the valve body.the one closest to the 1-2 accumulator (pass. side rear corner) is the fourth switch. If you have a two piece case, you have a 4L60E,the pressure switch is still on the valve body but it is an assembly,not a single switch.
700r4 lock up wire diagram? | Hot Rod Forum 82-86 valve bodies had a lock-up valve train. It was fed by the 1-2 shift valve. gov pressure would stroke the valve and it would feed oil to the .020 orifice in the stator, twix the lock-up valve and the lu solenoid. The unit did not need an ecm to...